Higher Engineering & Technology Activities Predicts Very Slightly Higher Loneliness for Population

Higher Engineering & Technology Activities Predicts Very Slightly Higher Loneliness for Population

Contents

Variables

A
Engineering & Technology Activities 156
A
Loneliness 604

Categories

A
Activities 1637
A
Emotions 2028

Actions

A
Join Study
A
Your Data

Tags

Low Confidence
Very Weak Effect Size
Positive Relationship
Population Study
cause image gauge image effect image
Participants reported a 2.2% average increase in Loneliness following above average Engineering & Technology Activities.

Abstract

Loneliness was generally 2.7333% higher than average after 6 minutes of Engineering & Technology Activities per 7 days.

Aggregated data from 3 study participants suggests with a LOW degree of confidence (p=0.28, 95% CI -0.307 to 0.453) that Engineering & Technology Activities has a very weakly positive predictive relationship (R=0.0732) with Loneliness.

The highest quartile of Loneliness measurements were observed following an average 8 minutes Engineering & Technology Activities per day.

The lowest quartile of Loneliness measurements were observed following an average 6 minutes of Engineering & Technology Activities per day.

After an onset delay of 0 seconds, Loneliness is typically 2% lower than average over the 7 days following around 6 minutes of Engineering & Technology Activities Engineering & Technology Activities.

Keywords: Engineering & Technology Activities, Loneliness, N-of-1 trials, real-world evidence, causal inference, observational study

Preliminary: Based on 3 participants. Results may change as more data is collected.

Results

Primary Findings

Analysis of 77 paired observations from 3 participants revealed a minimal improvement in Loneliness following above-average Engineering & Technology Activities exposure.

+2.7%
Change from Baseline
Minimal effect on Loneliness
0.02
Predictor Impact Score
Insufficient evidence for causal relationship

Supporting Statistics

Low
Confidence
0.073
Correlation (r)
p = 0.358
Significance
z = 0.12
Effect Magnitude
φ = 1.00
Temporality

What This Means

When participants had above-average Engineering & Technology Activities:

  • Loneliness increased by 2.7% on average
  • Temporal analysis supports Engineering & Technology Activities as the predictor (not the outcome)

Interpreting the Predictor Impact Score

The Predictor Impact Score (PIS) integrates multiple Bradford Hill causal criteria into a single metric. Use this guide to interpret the score:

PIS Range Interpretation Recommended Action
≥ 0.5 Strong evidence High priority for RCT validation
0.3 - 0.5 Moderate evidence Consider for experimental investigation
0.1 - 0.3 Weak evidence Monitor for additional data
< 0.1 Insufficient evidence Low priority; may be noise

Note: PIS is a prioritization heuristic, not proof of causation. High scores indicate relationships worth investigating, not confirmed causal effects. With only 3 participants, these scores are preliminary and will become more reliable as additional data is collected.

Optimal Daily Values (Precision Dosing)

Based on the observed relationship, we can estimate the predictor values associated with the best and worst outcomes. These values enable personalized dosing recommendations.

⚠️ Preliminary Data: With 3 participants and 77 observations, these optimal values are preliminary estimates. As more data is collected, precision will improve significantly.

0.2 h
Value Predicting Higher Loneliness
Average Engineering & Technology Activities when Loneliness exceeded its mean
0.1 h
Value Predicting Lower Loneliness
Average Engineering & Technology Activities when Loneliness was below its mean

What This Suggests

Loneliness tended to be highest when Engineering & Technology Activities was around 0.2 h.

Important: These values reflect correlations, not guaranteed causal effects. Individual responses may vary. Use as a starting point for personal experimentation, not as a definitive prescription. Consult healthcare providers before making treatment decisions.

Population Correlation

Engineering & Technology Activities Distribution

Loneliness Distribution

Statistical Summary

Relationship Statistics

Property Value
Cause Variable Name Engineering & Technology Activities
Effect Variable Name Loneliness
Sinn Predictive Coefficient 0.018972106845498
Confidence Level LOW
Confidence Interval 0.37985
Forward Pearson Predictive Coefficient 0.0732
Critical T Value 1.7
Total Engineering & Technology Activities Over Previous 7 days Before ABOVE Average Loneliness 8 minutes
Total Engineering & Technology Activities Over Previous 7 days Before BELOW Average Loneliness 6 minutes
Duration of Action 7 days
Effect Size very weakly positive
Number of Paired Measurements 77
Optimal Pearson Product 0.015997536197364
P Value 0.27962
Statistical Significance 0.3584
Strength of Relationship 0.37985
Study Type population
Analysis Performed At 2026-01-04
Number of Participants 3

Engineering & Technology Activities Info

Property Value
Variable Name Engineering & Technology Activities
Aggregation Method SUM
Analysis Performed At 2020-10-11
Duration of Action 7 days
Filling Value 0
Kurtosis 192.59552148544
Maximum Allowed Value 7 days
Mean 10 minutes
Median 1 seconds
Minimum Allowed Value 0 seconds
Number of Aggregate Predictors 13
Number of Aggregate Outcomes 143
Number of Measurements 10323
Number of Measurements (including those generated by tagged, joined, or child variables) 2174
Public true
Onset Delay 0 seconds
Standard Deviation 0.6594650087989
Unit Hours
User Variables 54
Variable Category Activities
Variable ID 5956914
Variance 2.3524248751664

Loneliness Info

Property Value
Variable Name Loneliness
Aggregation Method MEAN
Analysis Performed At 2020-10-11
Duration of Action 24 hours
Kurtosis 1.7882861897431
Maximum Allowed Value 5 out of 5
Mean 3.1872105042017 out of 5
Median 3.1930393382353 out of 5
Minimum Allowed Value 1 out of 5
Number of Aggregate Predictors 437
Number of Aggregate Outcomes 167
Number of Measurements 3446
Number of Measurements (including those generated by tagged, joined, or child variables) 3182
Public true
Onset Delay 0 seconds
Standard Deviation 0.39907362842154
Unit 1 to 5 Rating
User Variables 404
UPC 783324854602
Variable Category Emotions
Variable ID 89438
Variance 0.44549918243977

Introduction

Background

Engineering & Technology Activities (Activities) and Loneliness (Emotions) are both important factors in understanding human health and well-being. This study investigates the relationship between these two variables using real-world observational data.

Traditional randomized controlled trials (RCTs), while the gold standard for causal inference, are often impractical, expensive, or unethical for studying many health relationships. Aggregated N-of-1 observational studies offer a complementary approach that leverages within-subject comparisons across large populations to identify meaningful patterns.

Research Question

Do Engineering & Technology Activities affect Loneliness?

Additionally, we seek to determine:

  1. What is the direction and magnitude of any effect?
  2. How confident can we be in this relationship based on the available data?
  3. What are the optimal levels of Engineering & Technology Activities for maximizing Loneliness?

Study Objective

The objective of this study is to determine the nature of the relationship (if any) between Engineering & Technology Activities and Loneliness. Additionally, we attempt to determine the Engineering & Technology Activities values most likely to produce optimal Loneliness values.

Study Overview

This is a population-level observational study using aggregated N-of-1 methodology. By aggregating individual N-of-1 experiments, we can identify population-level patterns while accounting for the substantial individual variation that exists in most health relationships. Effect sizes are reported as percent change from baseline, enabling intuitive interpretation and comparison across different measures.

Full Methodology: Framework for Real-World Evidence-Based Pharmacovigilance: Aggregated N-of-1 Trials for Quantifying Treatment Effects

Discussion

Interpretation of Findings

Participants experienced a 2.7% improvement in Loneliness following above-average Engineering & Technology Activities exposure. The Predictor Impact Score (PIS) of 0.02 indicates insufficient evidence for a causal relationship.

Statistical Significance

Using a two-tailed t-test with alpha = 0.05, it was determined that the change in Loneliness is not statistically significant at a 95% confidence interval. This suggests that the Engineering & Technology Activities value may not have a significant influence on the Loneliness value, or that more data is needed to detect an effect.

After treatment, a 2.2% increase (0.0898 out of 5) from the mean baseline 3.06 out of 5 was observed. The relative standard deviation at baseline was 26.7%. The observed change was 0.12485 times the standard deviation.

A common rule of thumb considers a change greater than twice the baseline standard deviation on two separate pre-post experiments may be considered significant. This occurrence would have only a 5% likelihood of resulting from random fluctuation (a p-value < 0.05).

T-Test Details
Observed t-value: 0.748
Critical t-value: 1.700

Since t = 0.75 < 1.70, we cannot reject the null hypothesis.

Biological Plausibility

A plausible bio-chemical mechanism between predictor and outcome is critical for interpreting observational findings. This is where human judgment excels beyond statistical analysis.

Community feedback on the biological plausibility of this relationship is still being collected. Consider the known mechanisms by which Engineering & Technology Activities might influence Loneliness.

Bradford Hill Criteria Assessment

The Bradford Hill criteria provide a framework for assessing causality in observational studies. Our methodology operationalizes six of the nine criteria through the Predictor Impact Score (PIS):

Criterion How Addressed Metric
Strength Effect size magnitude Percent change from baseline (Δ%), z-score
Consistency Cross-participant replication Number of users (N), number of pairs (n)
Temporality Predictor precedes outcome Temporality factor (φ), onset delay (δ > 0)
Biological Gradient Dose-response relationship Gradient coefficient (φgradient)
Plausibility Biological mechanism assessment Community votes on mechanism plausibility
Specificity Category appropriateness Interest factor (finterest)

Predictor Impact Score (PIS)

The PIS integrates multiple Bradford Hill criteria into a composite metric quantifying how reliably a predictor affects an outcome. Higher scores indicate stronger evidence:

Population-Level PIS:

$$\text{PIS}_{\text{agg}} = |r_{\text{forward}}| \cdot w \cdot \phi_{\text{users}} \cdot \phi_{\text{pairs}} \cdot \phi_{\text{change}} \cdot \phi_{\text{gradient}}$$

Where φ-factors are saturation functions approaching 1 as evidence accumulates:

  • φusers = 1 - e-N/10 (user saturation)
  • φpairs = 1 - e-n/nsig (pair saturation)
  • φchange = 1 - e-Δspread/Δsig (effect spread saturation)
  • w = weighted average of plausibility votes

Temporality Assessment

We assess evidence for correct causal direction using the temporality factor:

$$\phi_{\text{temporal}} = \frac{|r_{\text{forward}}|}{|r_{\text{forward}}| + |r_{\text{reverse}}|}$$

Values approaching 1 indicate the predictor precedes the outcome (supporting causation); values near 0.5 suggest ambiguous directionality; values near 0 suggest reverse causation or confounding by indication.

Limitations

As with any observational study, correlation does not prove causation. Key limitations include:

  • Unmeasured confounders: Variables not tracked may influence results
  • Self-selection bias: Health trackers may differ from the general population
  • Measurement error: Self-reported data may contain recall bias
  • Confounding by indication: Sicker individuals may use more treatments

However, within-subject comparison and temporal precedence analysis partially mitigate these limitations. If the relationship is merely coincidental, as participants independently modify their Engineering & Technology Activities values, the observed strength will decline over time. Spurious correlations naturally dissipate as more data is collected.

Future Directions

Future research should examine:

  • Subgroup analyses to identify individual differences in response
  • Potential confounders and mediators of the observed relationship
  • Optimal dosing and timing for Engineering & Technology Activities
  • Confirmation through prospective or randomized designs
  • Biological mechanisms underlying the observed effects

Conclusion

📊 Preliminary Findings: With 3 participants, these results are based on limited data. Effect sizes and confidence will improve as more participants contribute data. Consider these findings directional rather than definitive.

Above-average Engineering & Technology Activities was associated with a 2.7% improvement in Loneliness—a minimal effect. The Predictor Impact Score of 0.02 indicates this relationship is requiring additional data before conclusions.

Bottom Line: Based on a PIS of 0.02 and a 2.7% effect size, this relationship currently lacks sufficient evidence. Continue monitoring as more data becomes available. Note: These conclusions may strengthen or change direction as more data is collected.

These findings contribute to our understanding of how Engineering & Technology Activities may influence Loneliness in real-world conditions. While preliminary, these results may inform future research directions. As more participants contribute data, the reliability and precision of these findings will improve substantially.

Help End Unnecessary Suffering

Current clinical trials are 82x more expensive than necessary and take 17 years to bring treatments to market. Pragmatic trials integrated into standard healthcare could reduce costs from $41,000 to $500 per participant and compress timelines to just 2 years. Learn how redirecting just 1% of global military spending could accelerate cures for the 2 billion people suffering from treatable diseases.

Make Suffering Optional

Methods

Study Design

This study is based on data donated by 3 participants. Thus, the study design is equivalent to the aggregation of 3 separate n=1 observational natural experiments.

This within-subject design is powerful because it controls for all stable individual characteristics (genetics, baseline health status, socioeconomic factors) that might otherwise confound the relationship between variables.

Data Analysis

Temporal Assumptions

The analysis incorporates temporal assumptions about the relationship between variables:

  • Onset Delay: It was assumed that 0 seconds would pass before a change in Engineering & Technology Activities would produce an observable change in Loneliness.
  • Duration of Action: It was assumed that Engineering & Technology Activities could produce an observable change in Loneliness for as much as 7 days after the stimulus event.

Statistical Methods

For each participant, we calculated the Pearson correlation coefficient between Engineering & Technology Activities values and subsequent Loneliness values. Individual correlations were then aggregated using Fisher's z-transformation to produce a population-level estimate:

Individual Correlation:

$$r_i = \frac{\sum(x_{ij} - \bar{x}_i)(y_{ij} - \bar{y}_i)}{\sqrt{\sum(x_{ij} - \bar{x}_i)^2 \sum(y_{ij} - \bar{y}_i)^2}}$$

Fisher's Z-Transformation:

$$z_i = \frac{1}{2} \ln\left(\frac{1 + r_i}{1 - r_i}\right)$$

Aggregated Correlation:

$$\bar{r} = \tanh(\bar{z}) \quad \text{where} \quad \bar{z} = \frac{1}{N}\sum_{i=1}^{N} z_i$$

Effect Size Calculation

Effect sizes are reported as percent change from baseline. For each participant, we compare the outcome following above-average predictor values to the overall baseline outcome:

$$\Delta\%_{\text{baseline}} = \frac{\bar{O}_{\text{follow-up}} - \bar{O}_{\text{baseline}}}{\bar{O}_{\text{baseline}}} \times 100$$

Effect Magnitude (Z-Score)

To assess effect magnitude relative to natural variability, we calculate the z-score:

$$z = \frac{|\Delta\%_{\text{baseline}}|}{\text{RSD}_{\text{baseline}}}$$

where RSDbaseline is the relative standard deviation of outcome during baseline period

A z-score > 2 indicates statistical significance (p < 0.05), meaning the observed change exceeds typical baseline fluctuation and is unlikely due to random variation.

Statistical Significance

Correlation significance is assessed using a two-tailed t-test:

$$t = \frac{r\sqrt{n-2}}{\sqrt{1-r^2}}$$

We reject the null hypothesis (ρ = 0) at α = 0.05 when |t| exceeds the critical value, providing statistical evidence that the observed relationship is not due to chance.

Data Sources

Engineering & Technology Activities data was primarily collected using RescueTime. Detailed reports show which applications and websites you spent time on. Activities are automatically grouped into pre-defined categories with built-in productivity scores covering thousands of websites and applications. You can customize categories and productivity scores to meet your needs.

Loneliness data was primarily collected using QuantiModo. QuantiModo allows you to easily track mood, symptoms, or any outcome you want to optimize in a fraction of a second. You can also import your data from over 30 other apps and devices. QuantiModo then analyzes your data to identify which hidden factors are most likely to be influencing your mood or symptoms.

Data Quality

Data quality measures were applied to ensure reliable results:

  • Minimum Data Requirement: Only participants with sufficient paired observations were included in the analysis.
  • Outlier Handling: Extreme values were winsorized to reduce the influence of measurement errors.
  • Missing Data: Days with missing values were handled using appropriate filling strategies based on the variable type.
  • Test User Exclusion: Test accounts and invalid users were excluded from all analyses.

Principal Investigator

Program & Methods

Mike P. Sinn
Sinn, M. P.

Designed and implemented data collection, aggregation, causal inference pipeline, and automated study generation framework. Developed the Predictor Impact Score methodology operationalizing Bradford Hill criteria for ranking causal relationships in observational data. When he tells people this at parties, they usually say they have to go check on their car.

Individual study outputs are automated, reproducible, and open to external audit. (Which I would seriously recommend.)

Contact

Cite This Study

APA Format
Sinn, M. P. (2026). Causal Analysis: Does Engineering & Technology Activities Affect Loneliness?. The Journal of Citizen Science. https://studies.crowdsourcingcures.org/study/cause-5956914-effect-89438-population-study
BibTeX 
@misc{sinn_cause_5956914_effect_89438_population_study_2026,
  author = {Sinn, Mike P.},
  title = {Causal Analysis: Does Engineering & Technology Activities Affect Loneliness?},
  year = {2026},
  publisher = {The Journal of Citizen Science},
  url = {https://studies.crowdsourcingcures.org/study/cause-5956914-effect-89438-population-study},
  note = {Accessed: January 6, 2026}
}
Chicago/Turabian
Sinn, Mike P. "Causal Analysis: Does Engineering & Technology Activities Affect Loneliness?." The Journal of Citizen Science. Accessed January 6, 2026. https://studies.crowdsourcingcures.org/study/cause-5956914-effect-89438-population-study.
Harvard
Sinn, M.P., 2026. Causal Analysis: Does Engineering & Technology Activities Affect Loneliness?. [Aggregated N-of-1 Study] The Journal of Citizen Science. Available at: https://studies.crowdsourcingcures.org/study/cause-5956914-effect-89438-population-study [Accessed January 6, 2026].

Study Type: Aggregated N-of-1 Observational Mega-Study
Evidence Level: Level II (Real-World Evidence)
Methodology: Bradford Hill Criteria with Predictor Impact Score (PIS)

References

This framework was originally developed in 2013 based on the Bradford Hill criteria. Subsequent literature has independently validated similar approaches to causal inference from observational data:

  1. Hill, A.B. (1965). The environment and disease: association or causation? Proceedings of the Royal Society of Medicine, 58(5), 295-300. [Bradford Hill criteria]
  2. Lillie, E.O., et al. (2011). The n-of-1 clinical trial: the ultimate strategy for individualizing medicine? Personalized Medicine, 8(2), 161-173. [N-of-1 methodology]
  3. Pearl, J. (2009). Causality: Models, Reasoning, and Inference . Cambridge University Press. [Causal inference]
  4. Hernán, M.A., & Robins, J.M. (2020). Causal Inference: What If . Chapman & Hall/CRC. [Free textbook]
  5. FDA (2018). Framework for FDA's Real-World Evidence Program . U.S. Food and Drug Administration. [Regulatory context]
  6. Duan, N., et al. (2013). Single-patient (n-of-1) trials: a pragmatic clinical decision methodology . Journal of Clinical Epidemiology, 66(8), S21-S28.
  7. Platt, R., et al. (2018). The FDA Sentinel Initiative—an evolving national resource . New England Journal of Medicine, 379(22), 2091-2093.

This information is for research and educational purposes only, not medical advice. Consult a healthcare provider before making health decisions. Terms of Service

LinkedIn Reddit