Higher Body Weight Predicts Slightly Lower Moderately Productive Score for Population

Higher Body Weight Predicts Slightly Lower Moderately Productive Score for Population

Contents

Variables

A
Body Weight 1140
A
Moderately Productive Score 243

Categories

A
Physique 41
A
Goals 126

Tags

Low Confidence
Weak Effect Size
Negative Relationship
Population Study
cause image gauge image effect image
Participants reported a 60.6% average decrease in Moderately Productive Score following above average Body Weight.

Abstract

Moderately Productive Score was generally 44% higher than average after an average of 230 pounds of Body Weight over the previous 7 days.

Aggregated data from 4 study participants suggests with a LOW degree of confidence (p=0.0791, 95% CI -3.157 to 2.658) that Body Weight has a weakly negative predictive relationship (R=-0.25) with Moderately Productive Score.

The highest quartile of Moderately Productive Score measurements were observed following an average 205 pounds Body Weight.

The lowest quartile of Moderately Productive Score measurements were observed following an average 214 pounds of Body Weight.

After an onset delay of 0 seconds, Moderately Productive Score is typically 20% lower than average over the 7 days following around 214 pounds of Body Weight Body Weight.

Keywords: Body Weight, Moderately Productive Score, N-of-1 trials, real-world evidence, causal inference, observational study

Preliminary: Based on 4 participants. Results may change as more data is collected.

Results

Primary Findings

Analysis of 51 paired observations from 4 participants revealed a minimal reduction in Moderately Productive Score following above-average Body Weight exposure.

-1.4%
Change from Baseline
Minimal effect on Moderately Productive Score
0.04
Predictor Impact Score
Insufficient evidence for causal relationship

Supporting Statistics

Low
Confidence
-0.250
Correlation (r)
p = 0.286
Significance
z = 0.81
Effect Magnitude
φ = 1.00
Temporality

What This Means

When participants had above-average Body Weight:

  • Moderately Productive Score decreased by 1.4% on average
  • Temporal analysis supports Body Weight as the predictor (not the outcome)

Interpreting the Predictor Impact Score

The Predictor Impact Score (PIS) integrates multiple Bradford Hill causal criteria into a single metric. Use this guide to interpret the score:

PIS Range Interpretation Recommended Action
≥ 0.5 Strong evidence High priority for RCT validation
0.3 - 0.5 Moderate evidence Consider for experimental investigation
0.1 - 0.3 Weak evidence Monitor for additional data
< 0.1 Insufficient evidence Low priority; may be noise

Note: PIS is a prioritization heuristic, not proof of causation. High scores indicate relationships worth investigating, not confirmed causal effects. With only 4 participants, these scores are preliminary and will become more reliable as additional data is collected.

Optimal Daily Values

No clear dose-response relationship detected. The Body Weight values associated with high and low Moderately Productive Score are too similar to provide meaningful dosing guidance. This may indicate a threshold effect (any amount works equally well), no effect, or insufficient data variance. With more participants, a clearer pattern may emerge.

Population Correlation

Body Weight Distribution

Moderately Productive Score Distribution

Relationship Analysis

Statistical Summary

Relationship Statistics

Property Value
Cause Variable Name Body Weight
Effect Variable Name Moderately Productive Score
Sinn Predictive Coefficient 0.041144057138606
Confidence Level LOW
Confidence Interval 2.9075
Forward Pearson Predictive Coefficient -0.2496
Critical T Value 1.908
Average Body Weight Over Previous 7 days Before ABOVE Average Moderately Productive Score 205 pounds
Average Body Weight Over Previous 7 days Before BELOW Average Moderately Productive Score 214 pounds
Duration of Action 7 days
Effect Size weakly negative
Number of Paired Measurements 51
Optimal Pearson Product 0.22639288176492
P Value 0.079091
Statistical Significance 0.2862
Strength of Relationship 2.9075
Study Type population
Analysis Performed At 2026-01-04
Number of Participants 4

Body Weight Info

Property Value
Variable Name Body Weight
Aggregation Method MEAN
Analysis Performed At 2020-09-23
Duration of Action 7 days
Kurtosis 29.271534088526
Maximum Allowed Value 1000 pounds
Mean 168.9619340574 pounds
Median 168.27481272906 pounds
Minimum Allowed Value 0 pounds
Number of Aggregate Predictors 883
Number of Aggregate Outcomes 257
Number of Measurements 108822
Number of Measurements (including those generated by tagged, joined, or child variables) 21092
Public true
Onset Delay 0 seconds
Standard Deviation 8.7190661755282
Unit Pounds
User Variables 417
UPC 875011003902
Variable Category Physique
Variable ID 1486
Variance 594.35417755402

Moderately Productive Score Info

Property Value
Variable Name Moderately Productive Score
Aggregation Method MEAN
Analysis Performed At 2020-10-11
Duration of Action 24 hours
Filling Value 0
Kurtosis 23.148423617473
Mean 0.24652094278693 percent
Median 0.034177636888889 percent
Number of Aggregate Predictors 192
Number of Aggregate Outcomes 51
Number of Measurements 823
Number of Measurements (including those generated by tagged, joined, or child variables) 77
Public true
Onset Delay 0 seconds
Standard Deviation 0.38905469769629
Unit Percent
User Variables 25
Variable Category Goals
Variable ID 6057115
Variance 0.53765703554184

Introduction

Background

Body Weight (Physique) and Moderately Productive Score (Goals) are both important factors in understanding human health and well-being. This study investigates the relationship between these two variables using real-world observational data.

Traditional randomized controlled trials (RCTs), while the gold standard for causal inference, are often impractical, expensive, or unethical for studying many health relationships. Aggregated N-of-1 observational studies offer a complementary approach that leverages within-subject comparisons across large populations to identify meaningful patterns.

Research Question

Does Body Weight affect Moderately Productive Score?

Additionally, we seek to determine:

  1. What is the direction and magnitude of any effect?
  2. How confident can we be in this relationship based on the available data?
  3. What are the optimal levels of Body Weight for maximizing Moderately Productive Score?

Study Objective

The objective of this study is to determine the nature of the relationship (if any) between Body Weight and Moderately Productive Score. Additionally, we attempt to determine the Body Weight values most likely to produce optimal Moderately Productive Score values.

Study Overview

This is a population-level observational study using aggregated N-of-1 methodology. By aggregating individual N-of-1 experiments, we can identify population-level patterns while accounting for the substantial individual variation that exists in most health relationships. Effect sizes are reported as percent change from baseline, enabling intuitive interpretation and comparison across different measures.

Full Methodology: Framework for Real-World Evidence-Based Pharmacovigilance: Aggregated N-of-1 Trials for Quantifying Treatment Effects

Discussion

Interpretation of Findings

Participants experienced a 1.4% reduction in Moderately Productive Score following above-average Body Weight exposure. The Predictor Impact Score (PIS) of 0.04 indicates insufficient evidence for a causal relationship.

Statistical Significance

Using a two-tailed t-test with alpha = 0.05, it was determined that the change in Moderately Productive Score is statistically significant at a 95% confidence interval. The p-value of 0.2862 indicates there is less than a 28.62% probability that this result occurred by chance.

After treatment, a 60.6% decrease (-1.46 percent) from the mean baseline 3.24 percent was observed. The relative standard deviation at baseline was 1.5667%. The observed change was 0.80816 times the standard deviation.

A common rule of thumb considers a change greater than twice the baseline standard deviation on two separate pre-post experiments may be considered significant. This occurrence would have only a 5% likelihood of resulting from random fluctuation (a p-value < 0.05).

T-Test Details
Observed t-value: 2.049
Critical t-value: 1.908

Since t = 2.05 > 1.91, we reject the null hypothesis.

Biological Plausibility

A plausible bio-chemical mechanism between predictor and outcome is critical for interpreting observational findings. This is where human judgment excels beyond statistical analysis.

Community feedback on the biological plausibility of this relationship is still being collected. Consider the known mechanisms by which Body Weight might influence Moderately Productive Score.

Bradford Hill Criteria Assessment

The Bradford Hill criteria provide a framework for assessing causality in observational studies. Our methodology operationalizes six of the nine criteria through the Predictor Impact Score (PIS):

Criterion How Addressed Metric
Strength Effect size magnitude Percent change from baseline (Δ%), z-score
Consistency Cross-participant replication Number of users (N), number of pairs (n)
Temporality Predictor precedes outcome Temporality factor (φ), onset delay (δ > 0)
Biological Gradient Dose-response relationship Gradient coefficient (φgradient)
Plausibility Biological mechanism assessment Community votes on mechanism plausibility
Specificity Category appropriateness Interest factor (finterest)

Predictor Impact Score (PIS)

The PIS integrates multiple Bradford Hill criteria into a composite metric quantifying how reliably a predictor affects an outcome. Higher scores indicate stronger evidence:

Population-Level PIS:

$$\text{PIS}_{\text{agg}} = |r_{\text{forward}}| \cdot w \cdot \phi_{\text{users}} \cdot \phi_{\text{pairs}} \cdot \phi_{\text{change}} \cdot \phi_{\text{gradient}}$$

Where φ-factors are saturation functions approaching 1 as evidence accumulates:

  • φusers = 1 - e-N/10 (user saturation)
  • φpairs = 1 - e-n/nsig (pair saturation)
  • φchange = 1 - e-Δspread/Δsig (effect spread saturation)
  • w = weighted average of plausibility votes

Temporality Assessment

We assess evidence for correct causal direction using the temporality factor:

$$\phi_{\text{temporal}} = \frac{|r_{\text{forward}}|}{|r_{\text{forward}}| + |r_{\text{reverse}}|}$$

Values approaching 1 indicate the predictor precedes the outcome (supporting causation); values near 0.5 suggest ambiguous directionality; values near 0 suggest reverse causation or confounding by indication.

Limitations

As with any observational study, correlation does not prove causation. Key limitations include:

  • Unmeasured confounders: Variables not tracked may influence results
  • Self-selection bias: Health trackers may differ from the general population
  • Measurement error: Self-reported data may contain recall bias
  • Confounding by indication: Sicker individuals may use more treatments

However, within-subject comparison and temporal precedence analysis partially mitigate these limitations. If the relationship is merely coincidental, as participants independently modify their Body Weight values, the observed strength will decline over time. Spurious correlations naturally dissipate as more data is collected.

Future Directions

Future research should examine:

  • Subgroup analyses to identify individual differences in response
  • Potential confounders and mediators of the observed relationship
  • Optimal dosing and timing for Body Weight
  • Confirmation through prospective or randomized designs
  • Biological mechanisms underlying the observed effects

Conclusion

📊 Preliminary Findings: With 4 participants, these results are based on limited data. Effect sizes and confidence will improve as more participants contribute data. Consider these findings directional rather than definitive.

Above-average Body Weight was associated with a 1.4% reduction in Moderately Productive Score—a minimal effect. The Predictor Impact Score of 0.04 indicates this relationship is requiring additional data before conclusions.

Bottom Line: Based on a PIS of 0.04 and a 1.4% effect size, this relationship currently lacks sufficient evidence. Continue monitoring as more data becomes available. Note: These conclusions may strengthen or change direction as more data is collected.

These findings contribute to our understanding of how Body Weight may influence Moderately Productive Score in real-world conditions. While preliminary, these results may inform future research directions. As more participants contribute data, the reliability and precision of these findings will improve substantially.

Help End Unnecessary Suffering

Current clinical trials are 82x more expensive than necessary and take 17 years to bring treatments to market. Pragmatic trials integrated into standard healthcare could reduce costs from $41,000 to $500 per participant and compress timelines to just 2 years. Learn how redirecting just 1% of global military spending could accelerate cures for the 2 billion people suffering from treatable diseases.

Make Suffering Optional

Methods

Study Design

This study is based on data donated by 4 participants. Thus, the study design is equivalent to the aggregation of 4 separate n=1 observational natural experiments.

This within-subject design is powerful because it controls for all stable individual characteristics (genetics, baseline health status, socioeconomic factors) that might otherwise confound the relationship between variables.

Data Analysis

Temporal Assumptions

The analysis incorporates temporal assumptions about the relationship between variables:

  • Onset Delay: It was assumed that 0 seconds would pass before a change in Body Weight would produce an observable change in Moderately Productive Score.
  • Duration of Action: It was assumed that Body Weight could produce an observable change in Moderately Productive Score for as much as 7 days after the stimulus event.

Statistical Methods

For each participant, we calculated the Pearson correlation coefficient between Body Weight values and subsequent Moderately Productive Score values. Individual correlations were then aggregated using Fisher's z-transformation to produce a population-level estimate:

Individual Correlation:

$$r_i = \frac{\sum(x_{ij} - \bar{x}_i)(y_{ij} - \bar{y}_i)}{\sqrt{\sum(x_{ij} - \bar{x}_i)^2 \sum(y_{ij} - \bar{y}_i)^2}}$$

Fisher's Z-Transformation:

$$z_i = \frac{1}{2} \ln\left(\frac{1 + r_i}{1 - r_i}\right)$$

Aggregated Correlation:

$$\bar{r} = \tanh(\bar{z}) \quad \text{where} \quad \bar{z} = \frac{1}{N}\sum_{i=1}^{N} z_i$$

Effect Size Calculation

Effect sizes are reported as percent change from baseline. For each participant, we compare the outcome following above-average predictor values to the overall baseline outcome:

$$\Delta\%_{\text{baseline}} = \frac{\bar{O}_{\text{follow-up}} - \bar{O}_{\text{baseline}}}{\bar{O}_{\text{baseline}}} \times 100$$

Effect Magnitude (Z-Score)

To assess effect magnitude relative to natural variability, we calculate the z-score:

$$z = \frac{|\Delta\%_{\text{baseline}}|}{\text{RSD}_{\text{baseline}}}$$

where RSDbaseline is the relative standard deviation of outcome during baseline period

A z-score > 2 indicates statistical significance (p < 0.05), meaning the observed change exceeds typical baseline fluctuation and is unlikely due to random variation.

Statistical Significance

Correlation significance is assessed using a two-tailed t-test:

$$t = \frac{r\sqrt{n-2}}{\sqrt{1-r^2}}$$

We reject the null hypothesis (ρ = 0) at α = 0.05 when |t| exceeds the critical value, providing statistical evidence that the observed relationship is not due to chance.

Data Sources

Body Weight data was primarily collected using Fitbit. Fitbit makes activity tracking easy and automatic.

Moderately Productive Score data was primarily collected using RescueTime. Detailed reports show which applications and websites you spent time on. Activities are automatically grouped into pre-defined categories with built-in productivity scores covering thousands of websites and applications. You can customize categories and productivity scores to meet your needs.

Data Quality

Data quality measures were applied to ensure reliable results:

  • Minimum Data Requirement: Only participants with sufficient paired observations were included in the analysis.
  • Outlier Handling: Extreme values were winsorized to reduce the influence of measurement errors.
  • Missing Data: Days with missing values were handled using appropriate filling strategies based on the variable type.
  • Test User Exclusion: Test accounts and invalid users were excluded from all analyses.

Principal Investigator

Program & Methods

Mike P. Sinn
Sinn, M. P.

Designed and implemented data collection, aggregation, causal inference pipeline, and automated study generation framework. Developed the Predictor Impact Score methodology operationalizing Bradford Hill criteria for ranking causal relationships in observational data. When he tells people this at parties, they usually say they have to go check on their car.

Individual study outputs are automated, reproducible, and open to external audit. (Which I would seriously recommend.)

Contact

Cite This Study

APA Format
Sinn, M. P. (2026). Causal Analysis: Does Body Weight Affect Moderately Productive Score?. The Journal of Citizen Science. https://studies.crowdsourcingcures.org/study/cause-1486-effect-6057115-population-study
BibTeX 
@misc{sinn_cause_1486_effect_6057115_population_study_2026,
  author = {Sinn, Mike P.},
  title = {Causal Analysis: Does Body Weight Affect Moderately Productive Score?},
  year = {2026},
  publisher = {The Journal of Citizen Science},
  url = {https://studies.crowdsourcingcures.org/study/cause-1486-effect-6057115-population-study},
  note = {Accessed: January 11, 2026}
}
Chicago/Turabian
Sinn, Mike P. "Causal Analysis: Does Body Weight Affect Moderately Productive Score?." The Journal of Citizen Science. Accessed January 11, 2026. https://studies.crowdsourcingcures.org/study/cause-1486-effect-6057115-population-study.
Harvard
Sinn, M.P., 2026. Causal Analysis: Does Body Weight Affect Moderately Productive Score?. [Aggregated N-of-1 Study] The Journal of Citizen Science. Available at: https://studies.crowdsourcingcures.org/study/cause-1486-effect-6057115-population-study [Accessed January 11, 2026].

Study Type: Aggregated N-of-1 Observational Mega-Study
Evidence Level: Level II (Real-World Evidence)
Methodology: Bradford Hill Criteria with Predictor Impact Score (PIS)

References

This framework was originally developed in 2013 based on the Bradford Hill criteria. Subsequent literature has independently validated similar approaches to causal inference from observational data:

  1. Hill, A.B. (1965). The environment and disease: association or causation? Proceedings of the Royal Society of Medicine, 58(5), 295-300. [Bradford Hill criteria]
  2. Lillie, E.O., et al. (2011). The n-of-1 clinical trial: the ultimate strategy for individualizing medicine? Personalized Medicine, 8(2), 161-173. [N-of-1 methodology]
  3. Pearl, J. (2009). Causality: Models, Reasoning, and Inference . Cambridge University Press. [Causal inference]
  4. Hernán, M.A., & Robins, J.M. (2020). Causal Inference: What If . Chapman & Hall/CRC. [Free textbook]
  5. FDA (2018). Framework for FDA's Real-World Evidence Program . U.S. Food and Drug Administration. [Regulatory context]
  6. Duan, N., et al. (2013). Single-patient (n-of-1) trials: a pragmatic clinical decision methodology . Journal of Clinical Epidemiology, 66(8), S21-S28.
  7. Platt, R., et al. (2018). The FDA Sentinel Initiative—an evolving national resource . New England Journal of Medicine, 379(22), 2091-2093.

This information is for research and educational purposes only, not medical advice. Consult a healthcare provider before making health decisions. Terms of Service

LinkedIn Reddit